AST SI10C plain bearings

J:68 mm; H2:93 mm; G:M6x1; d:35 mm; s1:21.45 mm; Designation of bearing:UC207G2T20; E:22 mm; Z:59.9 mm; N:M12; H:47.6 mm;

Shaft Attachment (2):Set Screw; Bearing Insert Material:Steel; Flinger Material:Steel; Seal Type:Single Lip; Housing Type:Flange Bracket; UPC:782475319213; Grease Type:Unirex N2; Housing Coating:Powder Coat; Bearing Family:Setscrew Ball Bearin; Housing Material:Cast Iron;

Bearing Family:D-Lock Ball Bearing; Manufacturing Plant Location:Rogersville, TN; Housing Type:2 Bolt Flange; Shaft Attachment (2):D-Lock; Flinger Material:Steel; Bearing Duty:Normal Duty; Bearing Bore Shape:Round; Bearing Series:204 Series; Brand:Baldor-Dodge; Self Aligning:Self Centering;

T min.:-20 °C; Designation of open end cover:SCO210-50; H1:14 mm; H:57.2 mm; C:35.1 kN; s1:21.75 mm; Designation of housing:PA210N-; B:43.5 mm; L1:35 mm; C0:23.2 kN;

UPC:782475894949; Anti-Rotation Pin:Yes; Retainer Material:Nylon; Self Aligning:Self Centering; Base to Center Height:Not Applicable; Bearing Inner Ring Material:Steel; Bearing Bore Shape:Round; Ball Bearing Housing Series:206 Series; Shaft Size:1.1250 in; Expansion Type:Non-Expansion;

T min.:-20 °C; C:96 kN; L:205 mm; Recommended tightening torque for set screw:33 Nm; Designation of housing:FL218-; Designation of bearing:UC218G2; Weight:10.95 kg; H:320 mm; T max.:100 °C; A2:96.3 mm;

Z:119.8 mm; T max.:100 °C; Designation of open end cover:SCOE213-65; H2:111 mm; L1:137 mm; B:68.2 mm; N:41mm; SW:5 mm; L3:121 mm; C:57.2 kN;

d:50 mm; fixing bolts G:M12; n:170 mm; Material of Housing:grey cast; recommended torque:65 Nm; h:70 mm; W1:267.5 mm; h1:142 mm; A2:30 mm; D:110 mm;

Ship Weight:1.3 LB; Anti-Rotation Pin:Yes; Housing Coating:No Coating; Seal Type:Shield; Manufacturing Plant Location:Rogersville, TN; Ball Grade:Class 24; Bearing Outer Ring Material:Steel; Housing Material:Stainless Steel; Shaft Size:1.0000 in; Bearing Locking Device:Tapered Adapter Slee;

d:61.91 mm; Recommended tightening torque for set screw:16.8 Nm; B:61.8 mm; T min.:-20 °C; s1:53.2 mm; H2:140 mm; Weight:4.46 kg; E:20 mm; A:60 mm; H:69.9 mm;

H:63.5 mm; L:219 mm; L1:70 mm; Designation of housing:P211-; C0:29.2 kN; C:43.55 kN; d1:74.5 mm; J:171 mm; Designation of bearing:EX211-35G2T20; B1:71.3 mm;

H:30.2 mm; G:M6x1; C0:6.65 kN; H1:11 mm; C:12.8 kN; B:34 mm; S:17 mm; L:76 mm; Designation of housing:PA204N-; T max.:100 °C;

s1:17 mm; A4:21 mm; G:M6x1; Designation of housing:FC205N-; d:25 mm; Recommended tightening torque for set screw:5.5 Nm; B:34 mm; Designation of open end cover:SCO205-25; S:14.3 mm; L:115 mm;

ra max:1 mm; Characteristic outer ring frequency, BPF0:5.24 Hz; Characteristic cage frequency, FTF:0.4 Hz; F:37.5 mm; Da max:57 mm; Dynamic load, C:46 kN; D:62 mm; d:30 mm; da min:34 mm; r1a max:0.6 mm;

B:55.6 mm; T min.:-20 °C; Designation of closed end cover:SCC211; Designation of housing:FC211N-; H3:125; G:M6x1; A4:30 mm; J:150 mm; A2:46.4 mm; d:55.56 mm;